英文自我评价和工作总结_个人英语自我评价和自我总结范文3篇(英文的自我评价怎么写)
为了便于自己在工作中更好的积累工作经验，我们有必要对自己的工作进行总结。那么如何写好一份工作总结呢？下面是范文网小编整理的英文自我评价和工作总结_个人英语自我评价和自我总结范文3篇(英文的自我评价怎么写)，以供借鉴。
In the past five months, under the leadership of the Department of Engineering Services, and colleagues through the common struggle, after their own positive efforts to do the following work.
one. Work attitude, ideological work.
I am very passionate about my job, I am able to follow the disciplines of the Engineering Department, maintain a responsible work attitude, humble learning, proactive, and constantly improve their technical level, and strive to lead the allocation of each task to do the most it is good.
two. Guide the installation work.
In Jinli permanent magnet installation combat work, through the equipment of the pipeline interface, rectifier cabinets and control cabinet wiring to pay-line installation, deepened my understanding of the equipment process and line power supply and distribution. But also trained me to understand the electrical wiring schematic, the ability to connect pipe installation drawings. But also to learn the skills of cognitive equipment spare parts. Every step of the installation process is done carefully. Found that the installation of lye filter timely and correct installation. Although the smooth completion of the guidance, but through the work found in the control cabinet in the plc model configuration and accessories detailed name, the role of functional understanding is not deep enough. The future focus on some technical drawings, working hours to the material security department cognitive accessories. Do not understand the issue of timely advice to colleagues and leaders.
third, equipment testing and debugging work.
In the workshop on the Saudi equipment test debugging, power plant cndq-10 hydrogen production equipment boot sequence, pid parameter settings, have a certain understanding. But also on the working principle of rectification from shallow to deep understanding. Before the test to determine through-cylinder is 90 degrees, tee 180 degrees. Through ball valve modulation off. Jordan's pneumatic film regulating valve should do its initial adjustment, debugging process, such as equipment can not reach the system pressure, the actual level does not match with the host computer, pump damage has occurred, should be based on the actual situation of correct investigation.
Fourth, the future direction of work.
Next month focused on the debugging phase of learning. Develop their own ability to find fault. The scene found the problem back to the leadership, more advice. In the future work to make up for deficiencies, work hard to do better.
In July 2011, I joined Baosteel Group BaGang Co., Ltd., and in the past year and a half I have been enthusiastic about my work, I have been strict with myself and my work position. I always keep my "modest", "prudent" The attitude of leadership in the cultivation of care and the help of colleagues to support, and always diligent study, proactive, and strive to improve themselves, and always work hard and earnestly complete the task, perform good job duties, outstanding performance in all aspects, has been the leadership and colleagues We are sure. Through their own continuous efforts, whether ideological, learning or work, have made considerable development and tremendous gains. Through this year's work and study, I realized that the growth of a qualified technician is a bright future, full of hope at the same time need to pay efforts and effort of the process, but also a need to constantly improve the continuous development of the long-term process. The following is a summary of my work in this year and self-identification:
1. Strict self-discipline, consciously strengthen party spirit, political consciousness has been improved
thought is the guide to action, a person if you want to do a good job, we must first establish their own work thinking. As a non-party member, I actively asked to join the party organization, in August 2011 turned over to join the party application, is now a party activists. In my daily work, I have strict demands on myself, consciously accepting the supervision and assistance of Party members and colleagues, persistently overcome my own shortcomings and make up for my own shortcomings.Always adhere to the Marxist-Leninist position, viewpoint and methodology, adhere to the correct world outlook, outlook on life, values, and to guide their own learning, work and life practice. As a member of the company, I seriously study and penetrate the company's mainstream cultural thinking, the company's core business philosophy, and actively promote the party spirit, And apply it to the actual work, consistent with the company.
Second, thirst for knowledge, with an open mind to learn
As the 2011 session of a new employee, and only continue to upgrade their knowledge and technical level, in order to better complete their work. Work encountered problems do not understand, the humbly to the master and other colleagues for advice. Daily work in the operating area in the morning software work in the afternoon into the scene to see more equipment to see more, and constantly increase their field experience.At the same time a serious study of the company's various documents on the management system and norms have a certain understanding of the work of the company to standardize the management of the standard to strict demands on themselves.
third, work hard, conscientiously complete the work tasks
I start from doing my own work and daily work, starting from me, from now on, I have always believed that a hard work, a harvest, so I have been working hard to continuously study and work hard. From the small things around and perseverance, love their own work to be able to take seriously each and every job, work, on time, effective use of working hours, stick to their posts. Equipment failure repair, no matter when they can do the first time to the field attendant operations, and put forward their own programs involved in repair, to ensure the normal operation of equipment as soon as possible. In February 2012 I was employed as a field professional engineer in the area. I followed the pace of the company to strengthen the theoretical knowledge of learning, and strive to achieve a new understanding of the use of new gains, to guide the practice of theory , To promote the work, improve the level of the purpose of the work, and constantly improve their technical level to guide their work. Through the theoretical study summary in the classroom, combined with practical problems in the work, "120T converter 9.1 meters platform operating instructions" were modified, and verify the operating standards have been prepared to apply the applicable standards have been revised, and the monthly new 2 standard operating standards to improve the standardization of operations. Through the dedication in their own work, tirelessly to make achievements, I want to constantly improve their job skills, and strive to master their job knowledge, to do their own work and the backbone of the experts, down to earth to do their jobs.
Fourth, work to promote team spirit, to overcome the work of one after another problem
In the usual work, first of all do the daily work, I and other colleagues in the work area both division of labor and cooperation, insist on regular and other technical personnel exchanges, and fully carry forward the democracy, never arbitrary, and thus a more successful completion of the maintenance department The work tasks. The first quarter of 2012 in the work area colleagues and the leadership of the strong support of the lead by me to complete the smooth completion of the "alloy material in the position of the bin material electroplating push rod flap card material solution" QC information released to solve the The Material Problem of Electro - hydraulic Push - rod Flap Valve of the 3 - position 120 - ton Converter of 9.1m Platform Alloy. The design for the company's annual savings of about 21 million. And through this activity to enhance the cohesion between colleagues to improve the ability to participate in the program designers to analyze issues and fully mobilize the enthusiasm of the staff, the use of existing technical strength for enterprises Taqian efficiency. In the fourth quarter of 2012, the QC team was set up in the sub-assembly operation area to improve the alloy chute for the 120-ton converter. The QC data for the "alloy chute increasing life plan" is scheduled to be released in mid-December.
Summary of eight years of work in the steel, I work on the ideas have made great progress. Of course, the results represent the past, in the future work, I will redouble our efforts to strive to do better. Because the technology continues to progress and update, only through continuous learning, down-to-earth style, can be competent for their jobs. At the same time in the accumulation of future work experience, and gradually develop their own predictability, and constantly in the on-site inspection, supervision at any time to identify problems and solve problems, so that their on-site comprehensive processing capacity continue to get exercise and improve.
Liu Jian
time flies, a semester is soon over, look back six months can say hectic and gain a lot. Thanks for all school leaders and teachers care and help to make progress and I have to improve in all aspects. Next, I work for the past six months to do a brief review and summary of the following aspects.
one. Ability to work
1. In the teaching process has always been implementing the concept of the new education curriculum reform. Accurate understanding and firmly grasp the core concept of the new curriculum, so that the classroom to life, for students living in the world and social practice. To independence, cooperation and explore ways of learning to enable students to participate in the teaching, so that the classroom is full of new vitality.
2. The stringent requirements of students, respect for students, promote the teaching of democracy, so that students learning anything, and continuously improve, so as to continuously improve their teaching and ideological consciousness, successfully completed the task of teaching.
3. The teaching process as teachers and cooperation, interaction and common development, to achieve the integration of Teachers' Role Shifting, curriculum and instruction, effectively improve the teaching ability.
two. Business learning
1. Strengthen theoretical, empirical articles, and the outline of learning. More learning, extensive learning education teaching theoretical knowledge, efforts to form a more complete theoretical knowledge structure,
2. Participate seriously in every teaching and research activities, and seriously make a record.
3. Outstanding teachers to observe school curriculum, and do a good job recording and analysis. Problems in the teaching process involved should take the initiative to consult an experienced and excellent teachers learn from each other.
4. More specifically research, done carefully prepare each lesson, and study materials, and strive to better each lesson. In the preparation process of careful analysis of materials, design lesson plans based on the actual situation of teaching materials and student characteristics. In the classroom, trying to mobilize the enthusiasm of the students, as much as possible so that each student participate in the classes.
5. Do a good job teaching reflection, so that learning - practice exchange --- --- summarized. Serious reflection and good record, record your own shortcomings to be improved and part of correct and timely, so that I can do in the teaching process weaknesses, for every time there is progress, to reinforce the foundation.
6. Increased reading time, more books, more records. After school, I insist often read books and newspapers, such as "young teachers", "new education", "moral education" and other magazines and newspapers. Multi-capture all aspects of information, constantly filling and make up their own to improve their own gold comprehensive cultural knowledge. To understand the dynamic information of teaching, often the Internet to find some excellent lesson plans courseware learning, strive to improve their teaching level, so I gain a lot, both on the students and interpersonal skills, or arrange classroom teaching, I there had been substantial progress.
7. Improve courseware making skills, and take advantage of the school's multimedia teaching equipment, widely used in teaching.
three. Aspects of personal qualities
1. Continuous learning and thinking, improve their professional and ethical standards.
2. Hands, according to the direction of professional ethics to do to promote further improve the quality of self and perfection.
3. Introspective self-test, the importance of personal language, instruments, and other aspects of the specification and correct, and constant self-reflection, to better fulfill a teacher standards.
the above is my summary of self-improvement of the semester, this semester's work, although coming to an end, but in the future of education and teaching, I will continue to work hard to true love and true heart to fulfill my educational duties.
时光飞逝，一学期很快即将过去，回望这半年可以说紧张忙碌而收获多多。感谢学校各领导及老师的关心和帮助,使我在各方面都有进步和提高。接下来，我从以下几个方面对过去半年的工作做一简要回顾与总结。
一.工作能力方面
1.在教学过程中始终贯彻新课程改革的教育理念。准确的理解和牢牢的把握新课程的核心理念，让课堂走向生活，面向学生的生活世界和社会实践。以自主，合作，探究的学习方式，让学生参与教学，让课堂充满新活力。
2.严格要求学生，尊重学生，发扬教学民主，使学生学有所得，不断提高，从而不断提高自己的教学水平和思想觉悟，顺利地完成了教育教学任务。
3.把教学过程视为师生合作，共同发展的互动过程，实现了教师的角色转换、课程与教学的整合，有效的提高了教学能力。
二.业务学习方面
1.加强理论，经验文章以及纲要的学习。多学习，广泛学习教育教学理论知识，努力形成比较完整的理论知识结构，
2.认真参加每一次的教研活动，并认真做好记录。
3.观摩校内优秀教师的课程，并认真做好记录和分析。在教学过程中所涉及到的问题要积极主动的向有经验的优秀教师请教和学习，取长补短。
4.多专研，做到了认真备好每节课，并钻研教材，努力上好每一节课。在备课过程中认真地分析教材，根据教材的特点及学生的实际情况设计教案。在课堂上，努力调动学生的积极性，尽可能使每个学生都参与到课堂中来。
5.认真做好教学反思，做到了学习——实践———交流———总结。并认真的做好反思记录，记录自己的不足之处和待提高的部分，及时的改正，使我在教学过程中能做到扬长避短，争取一次比一次有进步，以夯实基础。
6.增加了阅读时间，多读书，多记录。在课余，我坚持经常看书、看报，如《青年教师》、《新教育》、《德育报》等杂志和报刊。多采集各方面的信息，不断的填充和弥补自己，提高自己综合文化知识的含金量。为了解教学方面的动态信息，还经常上网找一些优秀的教案课件学习，努力提高自己的教学水平，使我收获不少，无论是在和学生相处的技巧，还是课堂教学的合理安排上，我都有了很大的进步。
7.提高课件制做技能，并充分利用学校的多媒体教学器材，广泛的应用于教学中。
三.个人素质方面
1.不断学习和思考，提高自己的职业道德水平。
2.亲身实践，按职业道德方向去做，促进自我素质的进一步提高和完善。
3.自省自检，注重个人的语言，仪表等方面的规范和端正，并不断的自我反省，更好的履行为人师表的标准。
以上是我本学期的自我提高总结，这学期的工作虽然即将结束，但在今后的教育教学工作中我会继续努力工作，以真挚的爱，真诚的心履行我的教育职责。